Brivis Evaporative Cooling System

Brivis Evaporative Cooling System

Brivis Evaporative Cooling System

Contour Series


Every stage of its operation has been designed to make it reliable and discreet. When you turn your cooler on, the Brivis Contour begins its Pre-Wet cycle. Clean fresh water enters the cooler and begins soaking the cooling pads before the fan starts, ensuring that you will only be provided with cool fresh air. It is packed with features to give you comfort and flexibility.

Exclusive to Brivis, our leading edge AquaSave technology saves you up to 45% on water consumption when compared to conventional bleed systems. The AquaSave cleans the water used in the cooling process avoiding any unnecessary wastage.

The Brivis Contour also has one of the smallest water reservoirs on the market, holding up to a third the amount of water than other coolers, minimizing the amount of water discharged when the cooler is turned off.

Promina Series


In the Brivis Promina, the AutoRefresh water management system controls the amount of fresh water added to the system. Once a pre-determined number of fill cycles have been completed the cooler will automatically flush the entire tank and refill it with clean, fresh water. While the water is being refreshed the cooler continues to operate, unlike coolers that use a continuous bleed or dump and fill cycle to refresh the tank water.

When cooling is no longer required the Brivis Promina will automatically run the FreshStart operation which means there is no stagnant water or sediment sitting in the cooler before it starts up again – reducing the need for seasonal maintenance.

Advanced Series


With large airflow and cooling pads, the Brivis Advance uses an uniquely designed AutoRefresh water management system and has a sloping trough which keeps the water constantly circulating through the system. It has the Brivis FreshStart operation fitted as standard.

The Brivis Advance also has a variable speed fan allowing the cooler to run slowly when all you need is a gentle breeze to keep you cool






Incorporating a specially designed DC Direct Drive Centrifugal Fan, the NEW Serenity is designed for power, performance and reliability. Available in three models and two colour options (Charcoal and Beige), the NEW Serenity’s variable speed centrifugal fan maximises airflow while maintaining the whisper-quiet performance you have come to expect from Brivis evaporative coolers – all without compromising power and quality.

With Brivis exclusive side panels, bottom discharge, fitted ozone generator and solenoid valve, plus gravity closing winter seal, the NEW Serenity is the perfect evaporative cooling solution.

Specifically designed for use with the dedicatedwired programmable controller, the NEW Serenity can be programmed to suit your application perfectly.

AD BAL Series


The Brivis AD cooler has a sloping trough which keeps the water moving towards the pump and constantly circulating through the system, keeping it fresh and clean. It has a variable speed fan allowing the cooler to run slowly when all you want is a gentle breeze to keep you cool.

If you are located in a high risk bushfire area and you want the ultimate in protection, the Brivis ‘Full Metal Jacket’ AD BAL has metal structural support with Stainless Steel Ember protection, specifically engineered to meet Australian Standard Bushfire Attack Level 29 (AS3959).

If you intend to build, renovate or repair a home in an area with high bushfire risk, you will need to take the Standard into account. Your builder, designer or architect will advise you on how best to achieve this.